Download Library
Title |
Abstract | Posted |
Size |
|---|---|---|---|
| White Paper: Hard Plastic Clad Silica Fibers For Near UV Applications | Many medical applications have been developed using light sources not only in the visible and near infra-red (NIR) regions, but also in the near ultraviolet (near UV) region of the spectrum. Hard Plastic Clad Silica (HPCS) have found much use in medical applications in general, but generally HPCS fibers are not recommended below 400 nm. Here we will describe HPCS fibers with excellent mechanical reliability and with optical losses of only 1.5 dB/m at 275 nm and less than about 0.2 dB/m at 350 nm. How this combination of properties can benefit diagnostic and surgical applications in the near UV will also be discussed. By CeramOptec Industries Inc. | 04/02/2009 | 98.5 KB |
| Datasheet: Vapor Trap | FTS Vapor traps are mechanically refrigerated cold traps that protect expensive vacuum pumps from harmful vapors which can shorten their life. The harmful vapors constitute any condensable gases such as water vapor, which, when allowed into the vacuum pump oil, cause it to break down. This results in decreased lubrication and can eventually cause failure of the pump. | 02/05/2009 | 83.7 KB |
| Datasheet: Multi-Cool® Bath | Mechanically Refrigerated Bath by SP Industries, Inc. | 02/05/2009 | 97.5 KB |
| Product Overview: Value-Added Services | Corry Micronics recently announced the introduction of its RF housing machining, assembly, and testing services. The turn-key program includes machining and plating the housing, installing the solder-in filters, hermetic seal and environmental testing services, and electrical and mechanical qualification. Product performance testing services, after the filters are installed into the housings, include temperature cycling, gross and fine leak testing, and capacitance and voltage break down testing. | 10/06/2008 | 115.4 KB |
| Research Report: Multiport RF Switch ICs and Modules | Multiport electrical switch IC/modules using InP HEMTs suitable for high-speed (10 or 40 Gbit/s) and micro-/millimeter-wave applications have been developed. The switches are classified as cold-FET switches, so they are analog switches with almost zero power dissipation. | 09/08/2008 | 891.4 KB |
| Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying | Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying | 03/26/2008 | 174.6 KB |
| Product Sheet: Large Capacity Glassware Washers | Product Sheet: Large Capacity Glassware Washers | 02/25/2008 | 275.2 KB |
| Product Sheet: Large Capacity Glassware Washer Accessories | Product Sheet: Large Capacity Glassware Washer Accessories | 02/25/2008 | 1.31 MB |
| Datasheet: MS2721B: Spectrum Master - Handheld Spectrum Analyzer | The MS2721B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems | 02/11/2008 | 426.1 KB |
| Datasheet: MS2723B: Spectrum Master - Handheld Spectrum Analyzer | The MS2723B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, and wireless medical patient monitoring systems, dynamic range of 101 dB is the best in its class | 02/11/2008 | 417.0 KB |
| Product Brochure: MS2721B/MS2723B/MS2724B: Spectrum Master - Handheld Spectrum Analyzer | The Anritsu MS2721B, MS2723B and MS2724B are the most advanced ultra-portable spectrum analyzers on the market, featuring unparalleled performance and size at a modest price. | 02/11/2008 | 2.19 MB |
| Design Notes: Filtered Military Circular Connectors | Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10µF depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz | 01/31/2008 | 1.14 MB |
| Product Listing: Filtered Military Circular Connectors | Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10µF depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz. | 01/31/2008 | 2.48 MB |
| Product Introduction: Filtered Military Circular Connectors | Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection | 01/31/2008 | 1.26 MB |
| Filtering Options and Electrical Characteristics | Corry Micronics Filtered Military Circular Connectors meet the most stringent military specifications including MIL-C-38999, MIL-C-26482, MIL-C-5015, and MIL-C-83723, and are beneficial in meeting the EMC requirement standards MIL-STD-461, MIL-STD-1275A, MIL-STD704A, and RTCA-DO160D. The filtering elements are completely integrated into the connector body so that the fit, form, and function of the connector application is unchanged. These connectors are ideal for military applications; Land Based, Airborne, and Sea. | 01/31/2008 | 2.82 MB |
| White Paper: Why The Need For Preventive Maintenance And Recalibration Of Spectroscopic Analytical Instruments? | Spectroscopic analytical instruments are complex optoelectronic devices that require careful mechanical, electronic and optical design to assure their long-term service reliability and performance. All of these instruments are constantly experiencing changes in temperature and pressure; undergoing mechanical stress and optical decay, resulting in the gradual degradation of the designed critical performance parameters | 11/21/2007 | 118.3 KB |
| Engineering Note: Spectrometer Signal-To-Noise And Dynamic Range Comparison | For all Ocean Optics Spectrometers, we specify the Signal-to-Noise (S/N) and the Dynamic Range. These parameters are often used interchangeably. However, it’s important to realize the performance parameters that comprise each measurement | 11/21/2007 | 311.9 KB |
| Engineering Note: HR4000/USB4000 Shutter Mode Performance In Hardware Trigger Mode | The HR4000 and USB4000 Spectrometers utilize the Toshiba TCD1304 CCD Detector. When operating a USB4000/HR4000 Spectrometer with this detector in External Hardware Trigger mode, you will find some subtle differences between spectra obtained in Normal versus External Hardware Trigger mode | 11/21/2007 | 303.2 KB |
| Engineering Note: PX-2 Pulsed Xenon Lamp Stability | Several factors determine the effective stability of the PX-2 Pulsed Xenon Lamp (i.e., rep rate, fiber diameter, time frame, wavelength, etc.). This document addresses the more common modes of operation and the resulting stability | 11/21/2007 | 81.0 KB |
| Datasheet: TP-125MK-III Automatic Fiber Optic Cleaner | Designed especially for use in production facilities, the Model TP-125MK-III automatic fiber optic cleaner, cleans a single fiber end fast, repeatedly and without static residue in less than 3 seconds. What has previously taken minutes for an operator, can now be done in a much shorter period of time | 11/14/2007 | 448.8 KB |
| Datasheet: Acrylate Coated Silica/Silica | Tapered optical fibers can be made either by fusing a short tapered section onto a longer fixed diameter fiber, or, by very carefully controlling the drawing process to produce a single continuous fiber with an integral tapered section | 10/01/2007 | 668.6 KB |
| Datasheet: Gold And Aluminum Buffered | Optical fibers are typically manufactured from a preform consisting of a silica core which may be doped silica or pure silica and a cladding classically of silica having a lower refractive index than the core | 10/01/2007 | 673.3 KB |
| Datasheet: Graded Index Silica/Silica | While graded index silica/silica fibers are available from a number of suppliers with standard polymer coatings, Fiberguide is unique in offering these fibers with high performance buffers/coatings of aluminum, gold and polyimide | 10/01/2007 | 662.7 KB |
| Datasheet: Single Mode Silica/Silica | While single mode silica/silica fibers are available from a number of suppliers with standard polymer coatings, Fiberguide is unique in offering these fibers with high performance buffers/coatings of aluminum, gold or polyimide | 10/01/2007 | 670.8 KB |
| Datasheet: Solarization Resistant Silica/Silica (Standard OH) | Long life, deep UV transmission is made possible with Fiberguide’s solarization resistant optical fibers, wherein the fiber core and clad are hydrogen doped at very high temperatures as the fiber exits the draw furnace and then hermetically sealed with an aluminum buffer/jacket during the fiber draw process | 10/01/2007 | 670.5 KB |